Avialable in 2.4m x 1.2m x 25mm
2.4m x 1.2m x 50mm
2.4m x 1.2m x 75mm
2.4m x 1.2m x 100mm
Ballytherm insulation is a foil faced Polyisacyanurate (PIR) insulation board
The PIR board is formed by a continuous foaming process which gives the board its tight cell structure and bonds the facing to the foam
After foaming the boards are cut to size and left to cure
Ballytherm is a strong rigid board suitable for self-supporting applications in floors walls and roofs
It can withstand the loadings in groundbearing floors
Ballytherm insulation is produced with a zero ozone depletion blowing agent. The insulation boards low thermal conductivity means less material is required
to achieve a given thermal resistance than for most other insulants
Available in Bulk Bags, with delivery available at standard rate
Perfect For All Building Requirements
Our finest grade of sand is extremely popular with builders because of its consistency and ease of use.
Available in :
100mm, Covers 13.89m2
150mm, Covers 9.18m2
200mm, Covers 5.93m2
Earthwool has arrived – the revolutionary product that marks the dawn of a new era for insulation, offering unprecedented levels of sustainability and performance.
Gyproc Bonding Coat Plaster 25kg Bag
Gyproc Bonding Coat is a lightweight Undercoat Plaster for use over smooth or medium suction backgrounds.
Has a finer mix offering improved workability and a smoother consistency
Easier to spread, rule and darby
Compatible with all Gyproc Finishing Plasters
Febond Blue Grit 10 Litre
FEBOND BLUE GRIT is a high performance plaster bonding agent specifically designed to provide an improved key to smooth surfaces. Containing a fine aggregate
FEBOND BLUE GRIT provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces and glazed tiles.
Gyproc Carlite Ultra Finish 25kg
Provides the highest quality aesthetic finish with a shorter set time
Provides high impact and scratch resistance
Suitable for use on a wide range of backgrounds
Ultra efficient setting time of approximately 1.5 hours
6 Month Shelf Life
Mini Mesh Angle Bead 2.4m
Mini Mesh Bead (25mm wing, 3mm plaster depth)
Designed for use with one coat plaster work down to a 3mm finish.
Fine mesh wings to provide an excellent plastering key.
Installation: Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work.
Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the ground and in dry conditions during site work.
Arc MS-11-MS Polymer
Adhesive & Sealant
Based on a hybrid polymer formulation giving outstanding bonding and sealing properties. Outperforms and replaces construction adhesives, wood glues, PU adhesives, sealants and acrylics. Can be applied underwater. Safe on delicate materials such as lead, mirrors and natural stone.
Arc MS-11 Rapid High Tack
Twice the strength. Twenty times faster cure. Hybrid Polymer formulation giving outstanding bonding and sealing properties. Outperforms and replaces construction adhesives, wood glues, PU adhesives, sealants and acrylics. Can be applied underwater. Safe on delicate materials such as lead, mirrors and natural stone.
Arc Roof & Gutter Sealant
A rubberised sealant specially developed for repairing leaking gutters, downpipes and flashings. Provides a permanent water resistant and weatherproof seal. Has a life performance expectancy up to 10 years. Suitable for sealing leaks in gutters, down pipes and flashings. Can also be used for bedding roof sheets and felts.
Arc Chemical Anchor
Polyester resin, styrene free chemical anchor. For loads up to 1000kg. For concrete, hollow & solid blocks and wood. Apply with a standard sealant gun. For fixing gates, railings, brackets, bolts etc. Also supplied: replacement nozzles and sleeves for hollow block application.
Self Levelling Flooring compound, a cement-based, protein-free,sub-floor smoothing underlayment, giving a consistently level screed from a feather-edge up to 6mm thick. Self Leveling
Flooring compound incorporates specially blended cements,graded sands and organic super-plasticisers, which with the addition of water, give the ideal properties for application to masonry based floor surfaces such as tamped or worn concrete and sand/cement floor screeds. On non-porous floors such as asphalt, plywood and painted surfaces, the self levelling compound powder should be mixed with floor latex screed rather than water to give improved adhesion to the substrate and enhanced abrasion and point-load resistance.