Thistle Bonding Coat is an undercoat plaster ideal for smooth and low suction backgrounds, including:
- Dense blocks
- Backgrounds pre-treated with ThistleBond-it bonding agent
Thistle Bonding Coat is now even better, with a finer mix giving improved workability, especially being:
- Easier to spread
A paper tape designed for reinforcement of flat joints or internal angles.
Paper tape designed for reinforcing flat joints and internal angles. Can be applied manually or with mechanical jointing systems. It has a centre crease, chamfered edges and spark perforations. Approximate 50mm width. Conforms to EN 13963.
Febond Blue Grit 10 Litre
FEBOND BLUE GRIT is a high performance plaster bonding agent specifically designed to provide an improved key to smooth surfaces. Containing a fine aggregate
FEBOND BLUE GRIT provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces and glazed tiles.
Gyproc Bonding Coat Plaster 25kg Bag
Gyproc Bonding Coat is a lightweight Undercoat Plaster for use over smooth or medium suction backgrounds.
Has a finer mix offering improved workability and a smoother consistency
Easier to spread, rule and darby
Compatible with all Gyproc Finishing Plasters
Gyproc Carlite Ultra Finish 25kg
Provides the highest quality aesthetic finish with a shorter set time
Provides high impact and scratch resistance
Suitable for use on a wide range of backgrounds
Ultra efficient setting time of approximately 1.5 hours
6 Month Shelf Life
Gyproc Wallboards are the ultimate lining solution for today’s buildings, providing cost effective drylining performance to help create modern internal environments that enables comfort and safety for occupants. They offer high quality linings for walls and ceilings, lift shafts and stairwells, corridors and auditoria, in buildings as diverse as houses, schools, hospitals and cinemas.
Used in drylining, masonry, timber frame and metal frame (walls, partitions and ceilings)
Plasterboards for enhanced moisture performance in intermittently damp conditions.
A range of plasterboards with water repellent additives and special paper liner to be used in the drylining of rooms with intermittent moisture applications requirements, such as in residential and commercial kitchens and bathrooms.
Mini Mesh Angle Bead 2.4m
Mini Mesh Bead (25mm wing, 3mm plaster depth)
Designed for use with one coat plaster work down to a 3mm finish.
Fine mesh wings to provide an excellent plastering key.
Installation: Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work.
Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the ground and in dry conditions during site work.
A self adhesive scrim tape, also known as scrim cloth, plasterboard joint tape or dry lining tape. Using a scrim tape you can eliminate pre-plastering which will save time, reducing the drying time and overall save you money.
Self adhesive scrim cloth
Fibreglass mesh strength for extra reinforcement
Eliminates pre-plastering, saves time and money